australian lada niva forum

bobbyd · by **bobbyd** on Thu Jul 02, 2009 9:36 pm

I have a vacum port with a male fitting at the rear of my intake manifold(2nd from the rear) which has no hose on it and I cant seem to find a stray hose which would require a vacum source, it is approx a 2 or 3 mm hole.
I presently have it blocked but it was shiney so I'm thinking something came off of it.
The engine was filthy when I bought the niva and I never looked hard enough at hose routeing

bobbyd · by **bobbyd** on Mon Jul 06, 2009 2:41 pm

I might route the 5/16 hose from the air/oil seperator to it, which presently goes to the secondary side of the carb downstream of the butterfly, (it has bugger all negative pressure compared to the one on the manifold)

bobbyd · by **bobbyd** on Mon Jul 20, 2009 6:40 am

Hows about someone opens their bonnet and has a quick look, then jumps on the forum and says "Bob that port has a line to...........

bobbyd · by **bobbyd** on Sat Jul 25, 2009 6:29 pm

I'll plug my HHO line in there

Lada & Korean Parts · by **Lada & Korean Parts** on Mon Jul 27, 2009 8:36 am

jaysus,thought someone would lift their bonett & have quick look for you.... :roll:

Chua · by **Chua** on Mon Jul 27, 2009 10:03 pm

Not sure if I got the correct drawing. But I hope it helps.

83ladaniva · by **83ladaniva** on Mon Jul 27, 2009 10:36 pm

I just checked mine if your talking about the connection thats just to the right and just below the rear connection on the manifold mine has a bung bolt in it but mine is 1983 pre pollution the only way to go really

danno83 · by **danno83** on Tue Jul 28, 2009 7:11 am

I did lift the hood, but it didn't help... there isn't anything in there to check for you...

bobbyd · by **bobbyd** on Tue Jul 28, 2009 12:27 pm

Chua.
Thats the one,
I am picking my baby up today from the RWC so I'll suss it out after that.
Thanks

Chua · by **Chua** on Fri Jul 31, 2009 12:24 am

No worries bobby. Glad I could help.
I had to rehook up all the tubes and hoses when I rebuild my engine last year, luckily I got this part cat. pic from some russian parts website for a 1.6l niva. The turbo nutter's website was for 1.7l Niva, which is not relevant.

bobbyd · by **bobbyd** on Fri Jul 31, 2009 9:49 pm

false alarm, my charcoal canister dosen't have that many "dicks" comeing out of it.
I'll keep you posted

83ladaniva · by **83ladaniva** on Sat Aug 01, 2009 12:10 am

lucky you

bobbyd · by **bobbyd** on Sat Aug 01, 2009 7:33 am

Here is the bugger.
Now feel free to open those bonnets.
(excuse th eedit method)

Lada & Korean Parts · by **Lada & Korean Parts** on Sat Aug 01, 2009 9:46 am

hey bob,you have access to fax machine????
i'll fax you through copy out of parts cat we were talking about

andy

bobbyd · by **bobbyd** on Tue Aug 04, 2009 7:05 pm

Thanks Andy I got the fax,Ill have a look as soon as I can

australian lada niva forum

Mystery vacum port

Mystery vacum port

Who is online